Casanoov
Basket

0 items added to your cart

My cart

SKU: 

NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 1
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 2
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 3
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 4
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 5
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 6
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 7
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 8
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 9
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 10
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 11
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 12
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 13
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 14
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 15
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 16
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 17
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor 18
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 1
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 2
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 3
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 4
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 5
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 6
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 7
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 8
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 9
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 10
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 11
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 12
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 13
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 14
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 15
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 16
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 17
NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor thumbnail 18
thumb
Height
Height: 180 cm
Width
Width: 300 cm
Opening direction
Opening direction: To the right / to the left
  • This motorized gate package includes:
  • NALI steel sliding gate
  • Width 299 cm and Height 183 cm
  • Rack and pinion motor (up to 300 kg)

NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor

PAC-003127

14639 kr

At home from April!
Coming soon. Notify me when this product is back in stock.
Height
Height: 180 cm
Width
Width: 300 cm
Opening direction
Opening direction: To the right / to the left
  • This motorized gate package includes:
  • NALI steel sliding gate
  • Width 299 cm and Height 183 cm
  • Rack and pinion motor (up to 300 kg)
Secure payment

Secure payment

Delivery within 5 days

Delivery within 5 days

Free shipping

Free shipping

NALI 3m Steel Sliding Gate, 180cm High, Black + RANGER C300 Motor

14639 kr

-5%

between 0 kr and 16799.99 kr*

-7%

between 16800 kr and 33599.99 kr*

-10%

greater than 33600 kr*

*HT orders

Description

NALI 3m Steel Sliding Gate, 180cm High, Black

Looking for a steel gate that's both elegant and secure? The NALI range meets all your needs.

The NALI sliding steel gate offers a modern and practical solution for your entrance. Thanks to its lateral opening, it saves space while ensuring smooth daily traffic flow. …

RANGER C300 sliding gate motorization

The RANGER C300 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate.
This rack-and-pinion motor is suitable for all types of sliding gates …

NALI 3m Steel Sliding Gate, 180cm High, Black

Looking for a steel gate that's both elegant and secure? The NALI range meets all your needs.

The NALI sliding steel gate offers a modern and practical solution for your entrance. Thanks to its lateral opening, it saves space while ensuring smooth daily traffic flow. Made of solid steel panels, it guarantees a high level of protection and long-lasting durability. Its clean, contemporary design blends easily with all exterior styles, adding a touch of refinement and security to your property.

Sliding gate: Suitable for large openings and challenging terrain

The sliding gate is designed to adapt to a wide variety of configurations, including sloping entrances or confined spaces. With its lateral opening, it allows for optimal space saving while facilitating vehicle access. Our sliding gates offer exceptional durability with minimal maintenance. By adding a motor to your sliding gate, you benefit from complete automation, making the daily use of your motorized sliding gate even more convenient and seamless.

Material: Galvanized steel
Color: Matte black
Dimensions: Width 299 cm x Height 183 cm
Minimum height of existing posts: 190 cm
Suitable Casanoov post model for this product: CARMO 15x15cm

- 4 steel panels (Length 94.45cm x Width 86.2cm)
- 3 steel panels (Length 172.4cm x Width 34cm)
- 1 top guide with 4 nylon rollers
- 6.2m steel guide rail
- 4 steel rollers
- 1 receiving strike plate
- 1 receiving stop
- 1 cylinder lock
- 1 handle (Black)
- 5 keys
- Finishing covers
- Screws

Posts are not included in our kits as they are not essential for installing your product if your property already has pillars/posts.

If your installation requires pillars, we have created a range of posts called CARMO, specifically designed for our iron gates and pedestrian gates, and sold in sets of two.

About the material

Steel stands out for its ability to adapt to a wide variety of environments while offering excellent durability. Treated to resist corrosion and weathering, it remains effective even after years of exposure. Its maintenance is minimal, making it a practical and reliable material. With steel, you choose an option designed to last, without compromising on efficiency.

How to maintain your steel structure?

Galvanized steel is durable, but regular maintenance extends its lifespan. Once or twice a year, clean it with soapy water and a soft sponge, then rinse and dry thoroughly. Avoid corrosive products and high-pressure cleaning.

Need help choosing the right product?
Contact our customer service team using our online form.

For this product

Clear instructions

Quick and easy assembly

Find all the necessary information about this product in the Technical specifications

Download the instructions

RANGER C300 sliding gate motorization

The RANGER C300 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate.
This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized.
Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 300 kg.

Here are the main technical specifications of the motor:

Motor voltage: 230V – 250W
Input power: 220VAC ±10%/110VAC ±10%
Frequency: 50Hz/60Hz
Gear module: M4 Z=16 teeth
Output torque: 30.0 Nm
Nominal rotation speed: 14,000 rpm
Maximum gate weight: 300 kg on level ground
Magnetic start and end stops
Environmental temperature: -25°C ~ +55°C
Protection class: IP55
Opening speed: approximately 12 meters per minute
Maximum force: 1100N
Nylon rack
Control card included in the motor.

- 1 motor
- 2 4-button remote controls with protective covers. Batteries are included.
- Nylon rack (4m – 12 pieces of 33cm)
- Installation and setup manual
- 2 quick release keys in case of power outage

The motor cannot be connected to a backup battery. In the event of a power outage, manual unlocking with two keys is possible. This disengages the motor's output pinion and allows you to operate your gate freely.
The flashing light and photocells are not included.

RANGER C300 motor features:

- Opening according to your choice: left to right (factory mode) or right to left.
- Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice.
- Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds.
- Condominium mode: This mode allows you to reduce settings and configure up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way.
- Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power.
- Manual gate release. Using the provided key, you can disengage the opening of your gate and operate it manually.
- Auto-stop. The gate stops if it encounters an obstacle.

You can combine this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.

Installation tips:

To successfully connect and configure your motor, proceed step by step and verify proper operation between each step. If you combine accessories with your C300 motor, check each time that your motor is in working order. Finally, ensure proper wiring of your electrical connection. This will help you manage your system and prevent electrical leaks.
Our Casanoov technical team is here to assist you if needed.

For this product

Clear instructions

Quick and easy assembly

Find all the necessary information about this product in the Technical specifications

Download the instructions

Technical data

  • Stud/rail assembly

    Welding

  • Assembly instructions

    Yes

  • Recommended number of persons for assembly

    2

  • Compatible engines

    Yes

  • Sleeper thickness

    1.2 mm

  • Required pillar height

    120 cm

  • Length of steel rail

    6 m

  • Eligibility Extension of warranty 10 years

    No

  • Required discharge length

    3 m

  • Length of the tail of the sliding gate

    20 cm

  • Rod assembly

    Welding

  • Supplied accessories

    Yes

  • Assembly time

    4 h

  • Sleeper Section

    40*40 mm

  • Warranty

    2 an(s)

  • Frame material

    Galvanized steel

  • Handle colour

    Black

  • Opening system

    Sliding

  • Number of casters

    4

  • RAL

    9005

  • Height

    180 cm

  • Opening direction

    To the right / to the left

  • Finishing

    Powder coating

  • Amounts Section

    40*40 mm

  • Compatible motorization type

    Sliding motorisation

  • Stud thickness

    1.2 mm

  • Eligibility Extended warranty 5 years

    No

  • Width between pillars

    300 cm

  • Type of filling

    Full

  • Handle material

    Aluminum

  • Exists by beating

    Yes

  • Width

    300 cm

  • Colour

    Black

  • Main material

    Steel

  • Locking system

    Barrel lock

  • Type of lock

    5 keys

  • Guide system

    Upper guide with 4 nylon olives

  • Type of mechanism

    Sliding

  • Compatible for portals

    Aluminium, pvc, wood, iron

  • Power

    230 V

  • Supply voltage

    220VAC±10%/110VAC±10%

  • Power consumption

    250 W

  • Nominal operating thrust

    1090 Nm

  • Maximum thrust

    1100 Nm

  • Rotational speed of the pinion in revolutions per minute

    1400

  • Opening / closing speed in meters per minute

    12m/min

  • Opening time for a 3m gate

    15 s

  • Gate weight up to

    300 kg

  • Engine rain protection

    IP55

  • Operating temperature

    -25°C to +55°C

  • Opening right to left

    Yes

  • Opening left to right

    Yes

  • Manganese limit switches

    Yes

  • Mechanical spring limit switches

    No

  • Gable material

    Alloy

  • Number of sprocket teeth

    16

  • Automatically programmable closing after opening

    Yes

  • Manual release

    Yes

  • Co-ownership mode

    Yes

  • Obstacle detection

    Yes

  • Photocell Compatible

    Yes

  • Flashing light compatible

    Yes

  • External battery compatible

    No

  • Keyboard compatible

    Yes

  • Key lock compatible

    Yes

  • Gradual opening / closing

    Yes

  • Adjustment of opening and closing speed

    Yes

  • Maximum number of associable remote controls

    30

  • Number of remote controls included

    2

  • Number of remote control keys

    4

  • Nylon rack included

    Yes

  • Instructions / screws included

    Yes

  • Infrared photocells included x2

    No

  • LED flashing light included

    No

  • Gross weight

    7 kg

  • Partial pedestrian opening

    Yes

  • Warranty

    2 an(s)

  • Eligibility Extended warranty 5 years

    No

  • Eligibility Extension of warranty 10 years

    No

  • Assembly time

    4 h

  • Recommended number of persons for assembly

    2

  • Assembly instructions

    Yes

  • Mounting accessories supplied

    Yes

Questions from our customers

All our products have a 2-year commercial warranty. 

All our products are delivered in kit form and to be assembled by you.
We have designed and imagined our products so that they are easy to assemble, and your customer experience is pleasant.
We have provided you with clear assembly instructions that you can download.
All the accessories necessary for the installation of your portal are provided to you, and everything that is included in our portals is specified in the technical characteristics of the product as well as in the description.

You can find all this information on each of our product sheets through these different tabs:

  1. In the “Technical characteristics” tab
  2. In the “Technical drawing” tab
  3. In the “Assembly instructions” tab

If, upon receipt and assembly of your products, you have any questions about the installation, you can always contact us through the Casanoov contact form.

For orders where all products are advertised as "In stock", we do our best to prepare your order in less than 24 hours.

Delivery times are communicated to you on each of our product sheets.

  1. To do this, look for the model you want, you will then find its product sheet:
  2. The delivery time will be notified directly on the product sheet, next to the add to cart button

For orders with products "in reservation", preparation and delivery take place at the time of the effective return to stock. 

We offer you in full consciousness a longer delivery time to allow you to receive your entire order in a grouped manner.

You are advised to place two different orders if you wish to receive the products in stock more quickly and place a second order with the products for which we are awaiting stock.
Our delivery costs are free, so this will have no impact on your final cost.

You can contact us via the contact form, section "Question about a product". We will do our utmost to provide you with all the help you need and to answer your questions about our articles.

A Question/Answer system will be set up very quickly on each of our products so that your questions can also help the Casanoov community in their choice!